Job Openings
Education: Diploma/BE/Btech-Mechanical Engineering
Experience: 5+ Years
General responsibilities:
Knowledge of Purchase process, Manufacturing process
- New vendors developments
- Costing of the parts prices .
- Convert PRs into Pos in 1 week
- Co-ordinate with Stores for GRPO Preparation
- Co-ordination with IQC for Acceptance of items
- Co-ordinate with Stores for Rejection , if any and salvaging excess Inventory
- Co-ordinate with Accounts for the timely payments
- Preparations Comparative statements and getting Pos approved.
- Timely Procurement components
- Cost reduction
- Development of new vendors
- Pending GRPOs , 4-5 Challan, IQC to be cleared in 1 4 working days
- Unwanted PRs and Pos to be closed
Job Features
Job Category | Full-Time |
Education: Electronics / Electrical Engineering Stream
Experience: 4+ Years
General responsibilities:
- Lead Generation, Customer Visits, and Attend Techn-commercial discussions..
- Preparation & submission of Technco-commercial offers to the customers.
- Coordination with the Design Dept, Production Dept, and other concerned depts for timely execution of the orders.
- Follow up with the customer's pre & Post orders for various aspects.
- Payment follow-ups against set Milestones, such as Advances against Order, intermediate payments & final payments.
- Company / Product Registrations with various PSUs / private customers for Industrial products.
- Working with the Internal team for sales activities
- Attend ISO meetings
- Any other Sales & Marketing related activities
Job Features
Job Category | Full-Time |
Education: MBA(HR)
Experience: 4+ Years
General responsibilities:
- Foster long-term relationships with past applicants and potential candidates
- Understand strategic hiring goals of the business
- Proactively source suitable candidates through a range of means
- Conduct phone screens/interviews
- Schedule interviews between candidates and hiring managers
- Prepare candidates for interviews
- Collaborate with hiring managers to understand the role and key attributes required
- Extend offers to successful candidates and salary negotiations
- Assist hiring managers and HR with the on boarding process
Job Features
Job Category | Full-Time |
Education: CA Inter (Must)/ M.Com/ B.Com
Experience: 3+ Years
No of Openings: 1
General responsibilities:
- Finalization of book of accounts
- Preparation of Balance sheet
- Handling of Internal Auditor, statutory Audit
- Project Costing Sheet
- Loan Statements Reconciliation Sheet
- Fixed Assets Register
- Depreciation Working
- Expenses Statement
- Documents Related to Nashik Subsidy and Follow Up for Nashik Subsidy
- Duty Drawback/ MIS/ License Working and Reconciliation of Receivable and Received Along with Follow Up
- Physical Verification of Fixed Assets
- Preparation of Statements Required for Balance Sheet
- Ledgers Reconciliation and Scrutiny
- Statements Required for MIS, Tax Audit, Internal Audit, Statutory Audit, Etc.
- Other Statements Preparation and Work as May Be Required from Time to Time
Job Features
Job Category | Full-Time |
Education: B.Tech / B.E in Electronics
Experience: 10 - 15 Years
No of Openings: 1
General responsibilities:
- THOROUGH SAP KNOWLEDGE WITH PLANNING PROFICIENCY
- AFTER RECEIPT OF SALES ORDER, PRODUCTION PLANNING OF THE AUX CONVERTER AS PER PR
- MONITORING THE POs RELEASE FOR THE PR RAISED
- ITR FOR RM BATCHWISE, RECIEPT OF RM FROM STORES
- PRODUCTION OF THE AUX CONVERTER
- INSPECTION CALL MONITORING AND SCHEDULE FOR DESPATCH POST INSPECTION
- PACKING AND DESPATCH IN COORDINATION WITH DESPATCH DEPT
- FREE SO SUPPLY MONITORING CONSIDERING THE STOCK RESERVATION FOR PRODUCTION
- AWARENESS AND IMPLEMENTATION OF QUALITY TOOLS WITH THE HELP OF QC DEPT
- COST SAVING / KAIZEN PROJECTS
Job Features
Job Category | Full-Time |
Education: B.E./B.Tech/M. Tech/Ph.D. - ENTC/Electronics/ Electrical/Electrical & Electronics/Power Electronics
Experience: 7 - 12 Years
No of Openings: 1
- Having good knowledge on power electronics devices like IGBTs, MOSFETs, POWER BJTs, gate drivers selection etc.
- Losses calculations of different power electronics devices and required heatsink selection
- Having experience on designing single phase and three phase inverters
- Having experience on designing single phase and three phase active front end converters
- Having experience on selection of DC Link capacitors, filter capacitors and snubber capacitors
- Having experience on filter chokes selection
- Having experience on busbar design, busbar stray inductance calculation
- IGBT switching characteristics validation
- Conducting single pulse test, doube pulse test and short circuit test on IGBTs
- Having good knowledge on different power supplies and different DC DC converter topologies
Job Features
Job Category | Full-Time |
Education: B.Tech / B.E in Electronics
Experience: 2 - 4 Years with solid experience in C/C++ programming for embedded systems
No of Openings: 5
General responsibilities:
- Knowledge of complier and debugging tools for various controllers.
- Good Knowledge of communication protocols TCP/IP, security Protocols and UDP
- Development of firmware in C and C++ in embedded systems
- Design and verification of firmware/embedded software, drivers, APIs and algorithms.
- Experience with assembly level and C language development including the tools used to edit, compile/assemble and debug code in an embedded environment.
- Knowledge of serial interfaces and peripherals (I2S,I2C,SPI,ADCs,DACs)
- Experience on DSP, PIC ICs programming.
Job Features
Job Category | Full-Time |
Education: B.Tech / B.E in Electronics/ Electronics and Comm./ Electronics & Telecomm.
Experience: 2 – 4 years
No of Openings: 1
General responsibilities:
- Designing and implementing low-power analog (op-amps, filters, power, BJTs, FETs) and digital
- Perform circuit tolerance analysis using Excel, Spice based Monte-Carlo analysis, TINA or equivalent tools
- Hazardous location compliant design: Select electronic components, design and build the PCB in compliance with various railway standards (IEC, EN, UL, CE) for Intrinsic safety, Functional Safety and EMI/EMC standards
- Analyze designs and modify them for EOL, manufacturing, or customer issues.
- Bring up boards and develop and execute low-level hardware test to assure design works as per target specs
- Debug boards using various test equipment such oscilloscopes, DMMs, logic analyzers etc.
- Generating test plans and test reports for electrical and environmental tests
- Assist with the fabrication, including procurement and build process, and test of prototype hardware
- Perform and/or oversee design verification tests
- Industry background – Industrial Product Design & Development involving Electronics circuit
- Computer proficiency – OrCAD Schematic Capture, PCB layout tools, Circuit Simulation Tools
- Working Parameters
Job Features
Job Category | Full-Time |
Title | Power Electronics Hardware Designing |
Department | Research & Development |
Location | Mumbai (Bhandup) |
Education | B.E./B.Tech/M. Tech/Ph.D. - ENTC/Electronics/ Electrical/Electrical & Electronics/Power Electronics |
Experience | 6+ years |
Roles & Responsibilities | Having good knowledge on power electronics devices like IGBTs, MOSFETs, POWER BJTs, gate drivers selection etc. |
Losses calculations of different power electronics devices and required heatsink selection | |
Experience in designing single phase and three phase inverters | |
Designing single phase and three phase active front end converters | |
Selection of DC Link capacitors, filter capacitors and snubber capacitors | |
Experience in filter chokes selection | |
Having experience in busbar design, busbar stray inductance calculation | |
IGBT switching characteristics validation | |
Conducting single pulse test, doube pulse test and short circuit test on IGBTs | |
Having good knowledge on different power supplies and different DC DC converter topologies | |
Must have experience in high power domain only | |
Soft Skills | Being able to lead a team, positive attitude |
Eagerness to learn and improve | |
Effective communication skills |
Job Features
Job Category | Full-Time |
Title | Embedded Software Development for Power Electronic Converters and Drives |
Location | Mumbai |
Education | B.E./B.Tech/M. Tech/Ph.D. - ENTC/Electronics/ Electrical/Electrical & Electronics/Power Electronics |
Experience | 1 to 6 years |
Introduction | The candidate is responsible for design and simulation of different control algorithms for various power electronic converters like Active Front End Converters, Motor Drives, DC - DC Converters, Battery chargers and implementing the control algorithms in DSP controllers through embedded coding . The engineer is also responsible for testing and validation of the SW in the actual HW in low power and high power applications. |
Responsibilities | Understanding different 32 bit micro controllers and programming in embedded C language |
Experience in writing embedded SW in C language for TI DSP (C2000) TMS320F28335,TMS320F28379D and its families | |
Embedded control SW development for P,PI,PID controllers | |
Embedded control SW development for v by f control of induction motors and PMSM motors | |
Embedded control SW development for vector control (FOC-Field oriented control) of induction motors and PMSM motors | |
Embedded control SW development for sensor less control of induction motors and PMSM motors | |
Embedded control SW development for time constant adaptation of induction motors and PMSM motors | |
Embedded control SW development for Active Front End Converters and Battery chargers | |
Implementation of control algorithms in DSP and FPGAs using embedded C | |
Embedded control SW development for different PWM techniques | |
Selection of different control topologies for power electronics converters and MATLAB Simulations | |
Testing of softwares in the prototype lab models and in high power | |
Undrestanding of difft. Power electronic switches - MOSFET, IGBT, SCR | |
Collaborate with customers to create systems based on their needs | |
Commissioning of new products in the end customer's systems | |
Monitor and maintain the system after development | |
Skills | Required Languages – Embedded C |
Controllers – PIC32, STM32, TI-DSP | |
Architectures – ARM (Cortex M4, M7) | |
Protocols – CAN, SPI, I2C, SPI, UART, USB | |
Driver’s implementation – Flash, USB host/Devices, E2prom, RTC etc. | |
Communication technologies – Radio communication, GSM, GPRS | |
Practical hands on experience with IDEs & Debugger, Oscilloscope, and Logic Analyzers | |
Able to understand schematics and working experience hardware. | |
Working experience with power point, word, excel etc. | |
Ability to diagnose complex technical problems with the system | |
Soft Skills | Being able to work well in teams, positive attitude. |
Eagerness to learn and improve | |
Effective communication skills |
Job Features
Job Category | Full-Time |