Embedded Software Development for Power Electronic Converters and Drives
Mumbai
Posted 1 month ago
| Title | Embedded Software Development for Power Electronic Converters and Drives |
| Location | Mumbai |
| Education | B.E./B.Tech/M. Tech/Ph.D. – ENTC/Electronics/ Electrical/Electrical & Electronics/Power Electronics |
| Experience | 1 to 6 years |
| Introduction | The candidate is responsible for design and simulation of different control algorithms for various power electronic converters like Active Front End Converters, Motor Drives, DC – DC Converters, Battery chargers and implementing the control algorithms in DSP controllers through embedded coding . The engineer is also responsible for testing and validation of the SW in the actual HW in low power and high power applications. |
| Responsibilities | Understanding different 32 bit micro controllers and programming in embedded C language |
| Experience in writing embedded SW in C language for TI DSP (C2000) TMS320F28335,TMS320F28379D and its families | |
| Embedded control SW development for P,PI,PID controllers | |
| Embedded control SW development for v by f control of induction motors and PMSM motors | |
| Embedded control SW development for vector control (FOC-Field oriented control) of induction motors and PMSM motors | |
| Embedded control SW development for sensor less control of induction motors and PMSM motors | |
| Embedded control SW development for time constant adaptation of induction motors and PMSM motors | |
| Embedded control SW development for Active Front End Converters and Battery chargers | |
| Implementation of control algorithms in DSP and FPGAs using embedded C | |
| Embedded control SW development for different PWM techniques | |
| Selection of different control topologies for power electronics converters and MATLAB Simulations | |
| Testing of softwares in the prototype lab models and in high power | |
| Undrestanding of difft. Power electronic switches – MOSFET, IGBT, SCR | |
| Collaborate with customers to create systems based on their needs | |
| Commissioning of new products in the end customer’s systems | |
| Monitor and maintain the system after development | |
| Skills | Required Languages – Embedded C |
| Controllers – PIC32, STM32, TI-DSP | |
| Architectures – ARM (Cortex M4, M7) | |
| Protocols – CAN, SPI, I2C, SPI, UART, USB | |
| Driver’s implementation – Flash, USB host/Devices, E2prom, RTC etc. | |
| Communication technologies – Radio communication, GSM, GPRS | |
| Practical hands on experience with IDEs & Debugger, Oscilloscope, and Logic Analyzers | |
| Able to understand schematics and working experience hardware. | |
| Working experience with power point, word, excel etc. | |
| Ability to diagnose complex technical problems with the system | |
| Soft Skills | Being able to work well in teams, positive attitude. |
| Eagerness to learn and improve | |
| Effective communication skills |
Job Features
| Job Category | Full-Time |